|
 The
Vulcan V600 Electronics System©
The highest quality on-board scale electronics
for the trucking industry.
The system that combines the
most advanced electronics with a user-friendly operation. Works with
existing Vulcan load cells and air sensors. Ideal for applications requiring
more than two channels, set points, interface to on-board computers,
or operators who wish to mix tractors and trailers.
|
KEY
BENEFITS:
|
- Uses the new VULCAN SINGLE
LINE (VSL) technology
- Unlimited mixing of trucks
and trailers without any adjustment, just plug in and go
- Automatically identifies
and adjusts for different truck/trailer configurations
- Handles up to 6 channels
- Set points with relay drivers
to control lights and alarms
- Printer interface with date
and time
- 16-Character, LED, dot-matrix
secondary display for user-friendly meter interface
Adjustable cycle time (between channels)
- Can capture over 1700 events
including date, time, and weight for down loading.
- Brilliant display - large,
red LEDs with 4 brightness settings for easy viewing inside/outside
the cab
- Lockout feature allows full
operation of scales while safeguarding against accidental changing
of calibration settings
- Simple operation with new
auto-calibrate feature
- Reduced wiring - a single
2 wire cable provides power and communication for all channels
- Works with Vulcan Super-Beam
fifth wheel, single point, and center hanger Ioad cells
- Configurable for custom
applications including weigh-in-motion
|
|
QUALITY,
DEPENDABILITY, SIMPLICITY FROM THE WORLD LEADER IN ON-BOARD SCALES
|
V600
METER
| VSL
VULCODER
|
Description: The
Vulcan V600 meter displays individual axle group weights (up to six channels)
and the total weight. The meter display can be fixed on any single channel
or group of channels or automatically cycled through all active channels.
Cycle times are user adjustable from 1 to 9 seconds. The large, primary
display can be easily read from outside the truck, if desired. The secondary
dot-matrix readout displays an extensive set of help instructions assisting
the user to quickly and easily identify and correct a problem, if it
occurs.
The V600 meter uses the new Vulcan
Single Line (VSL) technology to minimize truck and trailer wiring for the best
reliability. A V600 meter can immediately identify and read the weight from any
other VSL equipped truck or trailer.
| Description: The
VSL Vulcoder receives the analog voltage signal from the load cells or
air sensor. A computer inside the Vulcoder then calculates the weight
based on the calibration values stored in its memory. When the meter
requests weight from a channel, the proper Vulcoder will respond and
send the weight information back to the meter. All VSL Vulcoders connect
to the same two wire line. Any VSL equipped trailer can be plugged into
any truck with a V600 meter and be immediately identified and read properly.
|
Specification
| Specification
|
DISPLAY: LED,
variable brightness Primary: 6 - .7" high characters Secondary:
16 - .2" high characters
CYCLE SPEED: Variable, 1-9 seconds
SIZE: 8.0" W x 2.6" D x 3.6" H (including mounting
bracket)
RESOLUTION: 10, 20, 50, 100, or 200 lb or kg increments
VOLTAGE REQUIRED: 10.5 to 29.0 Vdc
CURRENT DRAW: .7 to 2 amps
PROTECTION: Inline, 2 amp fast acting fuses and reverse voltage
protection
WEIGHT: 27.8 oz (including mounting bracket)
| SIZE: 5.6" W
x 4.6" D x 1.5" H
2-WIRE COMMUNICATION CABLE: Vulcan designed special cable, urethane
jacketed, remains flexible in cold weather
4-WIRE SENSOR CABLE: Vulcan designed special shielded cable, polyurethane
jacketed, 4 conductor
ELECTRONICS: Environmentally sealed
CONNECTORS: Military grade with dual environmental seals
|
FOUR
CHANNEL TRACTOR / TRAILER EXAMPLE
|
|
|
